Magneto Wire - Condumex has the most complete range

Magneto Wire Condumex has the most complete range, manufactured in accordance with the most demanding global quality standards.

Magneto wire line for use in motors, transformers, coils, ballasts and electronics applications.

Ultra-fine magneto wire line for microelectronics

Quality recognized by the Federal Electricity Commission (CFE), Luz y Fuerza del Centro (LyFC), PEMEX, ANCE and UL, among others

Quality systems certified according to ISO 9001:2000

Products recognized by Underwriters Laboratories Inc.

Wires and Soleplates (ESP)
WIRES (EN)

01 Scheme

Magneto cable diagram 01 Scheme

Download

02 SOFT BARE COPPER WIRE

Bare round soft copper conductor 02 SOFT BARE COPPER WIRE

Download

03 Soft aluminum bare wire

Aluminum wire, soft temper, alloy 03 Soft aluminum bare wire

Download

04 SOFT COPPER NAKED SOLERA

Square or rectangular soft copper conductor 04 SOFT COPPER NAKED SOLERA

Download

05 SOFT COPPER NAKED SOLERA

Square or rectangular soft copper conductor 05 SOFT COPPER NAKED SOLERA

Download

06 WIRE AND PAPER-COVERED SOLERA 90 °C

1. Round, square or rectangular soft copper conductor 2. Crepe, kraft, thermally stabilized dielectric paper insulation with helically applied tapes 06 WIRE AND PAPER-COVERED SOLERA 90 °C

Download

07 WIRE AND PAPER-COVERED SOLERA 90 °C

1. Round, square or rectangular soft aluminum conductor 2. Crepe, kraft, thermally stabilized dielectric paper insulation with helically applied tapes 07 WIRE AND PAPER-COVERED SOLERA 90 °C

Download

08 WIRE AND SOLERA TERMAPELM.R. 220 °C

1. Round, square or rectangular soft copper conductor 2. Insulation of helically applied NOMEX (aromatic polyamide) paper tapes 08 WIRE AND SOLERA TERMAPELM.R. 220 °C

Download

09 WIRE AND SOLERA TERMAPELM.R. 220°C

1. Round, square or rectangular soft aluminum conductor 2. NOMEX (aromatic polyamide) paper insulation, with helically applied tapes 09 WIRE AND SOLERA TERMAPELM.R. 220°C

Download

10 MICA-COATED WIRE AND SOLERA 240 °C

1. Round, square or rectangular soft copper conductor 2. Non-hygroscopic material insulation (mica) 10 MICA-COATED WIRE AND SOLERA 240 °C

Download

11 MICA-COATED WIRE AND SOLERA 240 °C

1. Soft round, square or rectangular aluminum conductor 2. Non-hygroscopic material insulation (mica) 11 MICA-COATED WIRE AND SOLERA 240 °C

Download

12 WIRE SOLDANELM.R. NYLON 130 °C

1. Soft round copper conductor 2. Modified polyurethane resin insulation 3. Polyamide (nylon) overlayer 12 WIRE SOLDANELM.R. NYLON 130 °C

Download

13 POLISOLDANELM.R WIRE. 155°C

1. Soft round copper conductor 2. Modified polyurethane resin insulation 13 POLISOLDANELM.R WIRE. 155°C

Download

14 POLISOLDANELM.R WIRE. NYLON 155°C

1. Soft round copper conductor 2. Modified polyurethane resin insulation 3. Polyamide (nylon) overlayer 14 POLISOLDANELM.R WIRE. NYLON 155°C

Download

15 POLISOLDANELM.R WIRE. CEMENTABLE NYLON

1. Soft copper round conductor 2. Modified polyurethane resin insulation 3. Polyamide resin overlay (optional) 4. Cementable polyamide resin overlay 15 POLISOLDANELM.R WIRE. CEMENTABLE NYLON

Download

16 WIRE SOLDATERMANELM.R. NYLON 155°C

1. Soft round copper conductor 2. Modified polyester resin insulation 3. Polyamide (nylon) overlayer 16 WIRE SOLDATERMANELM.R. NYLON 155°C

Download

17 POLYSOLD WIREATERMANELM.R. 180°C

Without description 17 POLYSOLD WIREATERMANELM.R. 180°C

Download

18 POLYSOLD WIREATERMANELM.R. CEMENTABLE NYLON 180 °C

1. Soft round copper conductor. 2. Modified polyester resin insulation. 3. Modified amide imide resin overlay. 4. Cementable polyamide resin overlay. 18 POLYSOLD WIREATERMANELM.R. CEMENTABLE NYLON 180 °C

Download

19 WIRE AND SOLERA FORMANELM.R. 105 °C

1. Round, square or rectangular soft copper conductor 2. Modified polyvinyl formal resin insulation 19 WIRE AND SOLERA FORMANELM.R. 105 °C

Download

20 WIRE AND SOLERA FORMANELM.R. 105 °C

1. Round, square or rectangular soft aluminum conductor 2. Modified polyvinyl formal resin insulation 20 WIRE AND SOLERA FORMANELM.R. 105 °C

Download

21 WIRE TERMANELM.R. NYLON 155°C

1. Soft round copper conductor 2. Modified polyester resin insulation 21 WIRE TERMANELM.R. NYLON 155°C

Download

22 WIRE TERMANELM.R. NYLON 155°C

1. Soft round aluminum conductor 2. Modified polyester resin insulation 3. Polyamide (nylon) resin overlayer 22 WIRE TERMANELM.R. NYLON 155°C

Download

23 POLYTERMANEL WIRE R. 180 °C

1. Soft copper round conductor 2. Modified polyester resin insulation 23 POLYTERMANEL WIRE R. 180 °C

Download

24 POLYTERMANEL.R. WIRE AT 180 °C

1. Soft round aluminum conductor 2. Modified polyester resin insulation 24 POLYTERMANEL.R. WIRE AT 180 °C

Download

25 WIRE POLITERMANELM.R. NYLON 180°C

1. Soft round copper conductor 2. Modified polyester resin insulation 3. Polyamide resin (nylon) overlayer 25 WIRE POLITERMANELM.R. NYLON 180°C

Download

27 WIRE POLITERMANELM.R. AL NYLON 180 °C

1. Soft round aluminum conductor 2. Modified polyester resin insulation 3. Polyamide (nylon) resin overlay 27 WIRE POLITERMANELM.R. AL NYLON 180 °C

Download

28 WIRE AND SOLERA AMIDANELM.R. 200 °C

1. Round, square or rectangular soft copper conductor 2. Polyester imide resin insulation 3. Polyamide-imide resin overlay 28 WIRE AND SOLERA AMIDANELM.R. 200 °C

Download

29 AMIDANELM.R. WIRE AND SOLERA AT 220 °C

1. Round, square or rectangular soft aluminum conductor 2. Modified polyester resin insulation 3. Amide-imide resin overlay 29 AMIDANELM.R. WIRE AND SOLERA AT 220 °C

Download

30 WIRE AMIDANELM.R. AE 200 °C

1. Soft round copper conductor 2. Modified polyester resin insulation 3. Modified amide-imide resin overlay 30 WIRE AMIDANELM.R. AE 200 °C

Download

31 WIRE AMIDANELM.R. AE AT 220 °C

1. Soft round aluminum conductor 2. Modified polyester resin insulation 3. Amide-imide resin overlay 31 WIRE AMIDANELM.R. AE AT 220 °C

Download

32 AMIDANELM.R. ECOLOGICAL WIRE 200 °C

1. Soft round copper conductor 2. Modified polyester resin insulation 3. Amide-imide resin overlay 32 AMIDANELM.R. ECOLOGICAL WIRE 200 °C

Download

33 AMIDANELM.R. ECOLOGICAL WIRE 200 °C

Without description 33 AMIDANELM.R. ECOLOGICAL WIRE 200 °C

Download

34 AMIDANELM.R. ECOLOGICAL WIRE AT 220 °C

1. Soft round aluminum conductor 2. Modified polyester resin insulation 3. Amide-imide resin overlay 34 AMIDANELM.R. ECOLOGICAL WIRE AT 220 °C

Download

35 WIRE AMIDANELM.R. CEMENTABLE 200 °C

1. Soft round copper conductor 2. Modified polyester resin insulation 3. Modified amide-imide resin overlay 4. Cementable polyamide resin overlay 35 WIRE AMIDANELM.R. CEMENTABLE 200 °C

Download

36 WIRE AND SOLERA UNIVERSANELM.R. 200 °C

Without description 36 WIRE AND SOLERA UNIVERSANELM.R. 200 °C

Download

37 UNIVERSANELM.R. WIRE AND SOLERA AT 220 °C

1. Round, square or rectangular soft aluminum conductor 2. Modified polyester resin insulation 3. Amide-imide resin overlay 37 UNIVERSANELM.R. WIRE AND SOLERA AT 220 °C

Download

38 WIRE AND HEAD TERAMIDANELM.R. 220 °C

1. Round, square or rectangular soft copper conductor 2. Polyamide-imide resin insulation 38 WIRE AND HEAD TERAMIDANELM.R. 220 °C

Download

39 ULTRANELM.R. WIRE 220 °C

1. Soft round copper conductor 2. Polyester imide resin insulation 3. Modified amide-imide resin overlay 39 ULTRANELM.R. WIRE 220 °C

Download

40 ULTRANELM.R. WIRE 220 °C

1. Soft round aluminum conductor 2. Polyester imide resin insulation 3. Modified amide-imide resin overlay 40 ULTRANELM.R. WIRE 220 °C

Download

RJ45 CATEGORY 5e KEYSTONE TYPE JACK WITH FOLDING DUST COVER

Category 5e jacks are manufactured with flame-retardant thermoplastic bodies. Printed circuit boards with a type 110 IDC insulation displacement system are available in white, blue, red, and black with the following specifications and features: RJ45 CATEGORY 5e KEYSTONE TYPE JACK WITH FOLDING DUST COVER

Download

IDC 110 CATEGORY 5e SYSTEM PATCH PANEL WITH 24 AND 48 PORTS

Category 5e patch panels are manufactured with a black carbon steel faceplate and a flame-retardant PBT (Polybutylene Terephthalate) body. The printed circuit board features a 110-type IDC insulation displacement system and is available in 24 and 48 RJ-45 ports. The panels feature a rear management bar, bend radius conversion, and mechanical stress relief. The panels have the following specifications and features: IDC 110 CATEGORY 5e SYSTEM PATCH PANEL WITH 24 AND 48 PORTS

Download

UTP PATCH CABLE CATEGORY 5e

Patch cables are manufactured with 24 AWG stranded wire that allows the flexibility needed for crossover connections. At the ends, the patch cables are terminated in RJ-45 plugs that comply with the IEC 60603-7 standard and to relieve the mechanical stress of the cable in the plug, they are assembled with a molded boot of the same color as the cable jacket. Patch cables can be used both as patch cords and as work area cords. ConduNet patch cables have the following specifications and features. UTP PATCH CABLE CATEGORY 5e

Download

RJ45 CATEGORY 6 KEYSTONE TYPE JACK WITH FOLDING DUST COVER

Category 6 jacks are manufactured with a flame-retardant thermoplastic body. Printed circuit boards with a type 110 IDC insulation displacement system are available in white, blue, red, and black, with the following specifications and features: RJ45 CATEGORY 6 KEYSTONE TYPE JACK WITH FOLDING DUST COVER

Download

IDC 110 CATEGORY 6 SYSTEM PATCH PANEL WITH 24 AND 48 PORTS

Category 6 patch panels are manufactured with a black carbon steel faceplate and a flame-retardant PBT (Polybutylene Terephthalate) body. Printed circuit boards with a 110-type IDC insulation displacement system are available in 24 and 48 RJ-45 ports, with a rear bar for cable management, bend radius preservation, and stress relief. IDC 110 CATEGORY 6 SYSTEM PATCH PANEL WITH 24 AND 48 PORTS

Download

UTP CATEGORY 6 PATCH CABLE

Patch cables are manufactured with 23 AWG stranded wire that allows the flexibility needed for crossover connections. At the ends, the patch cables are terminated in RJ-45 plugs that comply with the IEC 60603-7 standard and to relieve the mechanical stress of the cable in the plug, they are assembled with a molded boot of the same color as the cable jacket. Patch cables can be used both as patch cords and work area cords. ConduNet patch cables have the following characteristics: UTP CATEGORY 6 PATCH CABLE

Download

Shielded RJ45 Jack Category 6A Keystone Type

Category 6A shielded jacks are manufactured with a die-cast zinc body with nickel plating. Printed circuit board with a 110-type IDC insulation displacement system. Shielded RJ45 Jack Category 6A Keystone Type

Download

24-PORT MODULAR ANGLED STRAIGHT PATCH PANEL

ConduNet 24-port modular angled straight patch panels are designed for both shielded and unshielded systems.

Download

KEYSTONE TYPE BLINDING MODULE FOR WALL PLATE

(No description) KEYSTONE TYPE BLINDING MODULE FOR WALL PLATE

Download

F/UTP CATEGORY 6A PATCH CABLE

Category 6A F/UTP patch cables are manufactured with 26 AWG stranded wire, providing the flexibility needed for crossover connections. The ends of the patch cables are terminated with RJ-45 plugs that comply with the IEC 60603-7 standard and have anti-tangle protection in the same color as the cable jacket. The patch cables can be used as both patch cords and work area cords. F/UTP CATEGORY 6A PATCH CABLE

Download

2 and 4 port wall plate for keystone jacks

ConduNet wall plates are manufactured in 2 and 4 spaces (ports) to insert standard size RJ-45 Keystone type connectors, thus ensuring that any connector that meets the Keystone specification can be inserted into ConduNet wall plates. The wall plates also comply with the following specifications and features: 2 and 4 port wall plate for keystone jacks

Download

ST FIBER OPTIC CONNECTOR

ConduNet ST connectors employ a spring-loaded, half-turn bayonet locking system. This mechanism makes them highly resistant to vibration, making them suitable for environments where connection security is critical. The high-quality 2.5 mm diameter zirconia ferrule ensures that the fiber is properly centered within the capillary channel, achieving the best possible coupling. ConduNet ST connectors are periodically subjected to basic optical, mechanical, and environmental testing, performed according to normal in-plant quality control procedures, which allows us to guarantee the highest quality in our ST connectors. ST FIBER OPTIC CONNECTOR

Download

SC FIBER OPTIC CONNECTOR

ConduNet SC connectors are designed to NTT-SC standards, making them fully compatible with SC-type hardware. The high-quality 2.5 mm zirconia ferrule features a 127 µm capillary channel for multimode fibers and a 125.5 µm capillary channel for single-mode fibers. SC FIBER OPTIC CONNECTOR

Download

ZIPCORD OFNR OPTICAL CABLE

ConduNet LC connectors are suitable for high density due to their small size, allowing for a very high integration scale. The anchoring system is similar to that of RJ-1.25 connectors; simply press the top tab to insert or release them. Their high-quality zirconia ferrule has a diameter of XNUMX mm, half the diameter of their predecessor SC and ST connectors. ConduNet LC connectors are periodically subjected to basic optical, mechanical, and environmental testing performed according to normal in-plant quality control procedures, allowing us to guarantee the highest quality in our LC connectors. ZIPCORD OFNR OPTICAL CABLE

Download

CONDUNET OPTICAL DISTRIBUTOR

The ConduNet optical distributor houses optical link splices and terminations in a single rack unit. It facilitates connection to active network equipment. The ConduNet optical distributor features a sliding tray that allows easy access to the splice trays. It is also equipped with two trays to increase splice capacity. Each splice tray can accommodate up to 24 fiber sleeves (with a diameter of 2,3 mm). Each splice tray can be opened and removed from the optical distributor individually. The ConduNet optical distributor features two drum-type organizers that allow storage of spare lengths of fiber optic strands.

Download

COUPLER MODULES AVAILABLE

(NO DESCRIPTION) COUPLER MODULES AVAILABLE

Download

FIBER OPTIC CORD

ConduNet offers a complete line of fiber optic patch cords for connecting multimode and singlemode fiber links in LC-LC, SC-SC, and ST-ST combinations (other connector combinations are available from manufacturer). The cords are available in standard lengths of 1, 2, and 3 meters (other manufacturer lengths are also available). All ConduNet fiber optic patch cords feature the highest quality ConduNet connectors and are terminated and tested to meet the most stringent performance specifications. FIBER OPTIC CORD

Download

Wires and Soleplates (ESP): 01 Scheme

Magneto cable diagram
Download

02 SOFT BARE COPPER WIRE

Bare round soft copper conductor
Download

03 Soft aluminum bare wire

Aluminum wire, soft temper, alloy
Download

04 SOFT COPPER NAKED SOLERA

Square or rectangular soft copper conductor
Download

05 SOFT COPPER NAKED SOLERA

Square or rectangular soft copper conductor
Download

06 WIRE AND PAPER-COVERED SOLERA 90 °C

1. Round, square or rectangular soft copper conductor 2. Crepe, kraft, thermally stabilized dielectric paper insulation with helically applied tapes
Download

07 WIRE AND PAPER-COVERED SOLERA 90 °C

1. Round, square or rectangular soft aluminum conductor 2. Crepe, kraft, thermally stabilized dielectric paper insulation with helically applied tapes
Download

08 WIRE AND SOLERA TERMAPELM.R. 220 °C

1. Round, square or rectangular soft copper conductor 2. Insulation of helically applied NOMEX (aromatic polyamide) paper tapes
Download

09 WIRE AND SOLERA TERMAPELM.R. 220°C

1. Round, square or rectangular soft aluminum conductor 2. NOMEX (aromatic polyamide) paper insulation, with helically applied tapes
Download

10 MICA-COATED WIRE AND SOLERA 240 °C

1. Round, square or rectangular soft copper conductor 2. Non-hygroscopic material insulation (mica)
Download

11 MICA-COATED WIRE AND SOLERA 240 °C

1. Soft round, square or rectangular aluminum conductor 2. Non-hygroscopic material insulation (mica)
Download

12 WIRE SOLDANELM.R. NYLON 130 °C

1. Soft round copper conductor 2. Modified polyurethane resin insulation 3. Polyamide (nylon) overlayer
Download

13 POLISOLDANELM.R WIRE. 155°C

1. Soft round copper conductor 2. Modified polyurethane resin insulation
Download

14 POLISOLDANELM.R WIRE. NYLON 155°C

1. Soft round copper conductor 2. Modified polyurethane resin insulation 3. Polyamide (nylon) overlayer
Download

15 POLISOLDANELM.R WIRE. CEMENTABLE NYLON

1. Soft copper round conductor 2. Modified polyurethane resin insulation 3. Polyamide resin overlay (optional) 4. Cementable polyamide resin overlay
Download

16 WIRE SOLDATERMANELM.R. NYLON 155°C

1. Soft round copper conductor 2. Modified polyester resin insulation 3. Polyamide (nylon) overlayer
Download

17 POLYSOLD WIREATERMANELM.R. 180°C

Without description
Download

18 POLYSOLD WIREATERMANELM.R. CEMENTABLE NYLON 180 °C

1. Soft round copper conductor. 2. Modified polyester resin insulation. 3. Modified amide imide resin overlay. 4. Cementable polyamide resin overlay.
Download

19 WIRE AND SOLERA FORMANELM.R. 105 °C

1. Round, square or rectangular soft copper conductor 2. Modified polyvinyl formal resin insulation
Download

20 WIRE AND SOLERA FORMANELM.R. 105 °C

1. Round, square or rectangular soft aluminum conductor 2. Modified polyvinyl formal resin insulation
Download

21 WIRE TERMANELM.R. NYLON 155°C

1. Soft round copper conductor 2. Modified polyester resin insulation
Download

22 WIRE TERMANELM.R. NYLON 155°C

1. Soft round aluminum conductor 2. Modified polyester resin insulation 3. Polyamide (nylon) resin overlayer
Download

23 POLYTERMANEL WIRE R. 180 °C

1. Soft copper round conductor 2. Modified polyester resin insulation
Download

24 POLYTERMANEL.R. WIRE AT 180 °C

1. Soft round aluminum conductor 2. Modified polyester resin insulation
Download

25 WIRE POLITERMANELM.R. NYLON 180°C

1. Soft round copper conductor 2. Modified polyester resin insulation 3. Polyamide resin (nylon) overlayer
Download

27 WIRE POLITERMANELM.R. AL NYLON 180 °C

1. Soft round aluminum conductor 2. Modified polyester resin insulation 3. Polyamide (nylon) resin overlay
Download

28 WIRE AND SOLERA AMIDANELM.R. 200 °C

1. Round, square or rectangular soft copper conductor 2. Polyester imide resin insulation 3. Polyamide-imide resin overlay
Download

29 AMIDANELM.R. WIRE AND SOLERA AT 220 °C

1. Round, square or rectangular soft aluminum conductor 2. Modified polyester resin insulation 3. Amide-imide resin overlay
Download

30 WIRE AMIDANELM.R. AE 200 °C

1. Soft round copper conductor 2. Modified polyester resin insulation 3. Modified amide-imide resin overlay
Download

31 WIRE AMIDANELM.R. AE AT 220 °C

1. Soft round aluminum conductor 2. Modified polyester resin insulation 3. Amide-imide resin overlay
Download

32 AMIDANELM.R. ECOLOGICAL WIRE 200 °C

1. Soft round copper conductor 2. Modified polyester resin insulation 3. Amide-imide resin overlay
Download

33 AMIDANELM.R. ECOLOGICAL WIRE 200 °C

Without description
Download

34 AMIDANELM.R. ECOLOGICAL WIRE AT 220 °C

1. Soft round aluminum conductor 2. Modified polyester resin insulation 3. Amide-imide resin overlay
Download

35 WIRE AMIDANELM.R. CEMENTABLE 200 °C

1. Soft round copper conductor 2. Modified polyester resin insulation 3. Modified amide-imide resin overlay 4. Cementable polyamide resin overlay
Download

36 WIRE AND SOLERA UNIVERSANELM.R. 200 °C

Without description
Download

37 UNIVERSANELM.R. WIRE AND SOLERA AT 220 °C

1. Round, square or rectangular soft aluminum conductor 2. Modified polyester resin insulation 3. Amide-imide resin overlay
Download

38 WIRE AND HEAD TERAMIDANELM.R. 220 °C

1. Round, square or rectangular soft copper conductor 2. Polyamide-imide resin insulation
Download

39 ULTRANELM.R. WIRE 220 °C

1. Soft round copper conductor 2. Polyester imide resin insulation 3. Modified amide-imide resin overlay
Download

40 ULTRANELM.R. WIRE 220 °C

1. Soft round aluminum conductor 2. Polyester imide resin insulation 3. Modified amide-imide resin overlay
Download
WIRES (EN): RJ45 CATEGORY 5e KEYSTONE TYPE JACK WITH FOLDING DUST COVER

Category 5e jacks are manufactured with flame-retardant thermoplastic bodies. Printed circuit boards with a type 110 IDC insulation displacement system are available in white, blue, red, and black with the following specifications and features:
Download

IDC 110 CATEGORY 5e SYSTEM PATCH PANEL WITH 24 AND 48 PORTS

Category 5e patch panels are manufactured with a black carbon steel faceplate and a flame-retardant PBT (Polybutylene Terephthalate) body. The printed circuit board features a 110-type IDC insulation displacement system and is available in 24 and 48 RJ-45 ports. The panels feature a rear management bar, bend radius conversion, and mechanical stress relief. The panels have the following specifications and features:
Download

UTP PATCH CABLE CATEGORY 5e

Patch cables are manufactured with 24 AWG stranded wire that allows the flexibility needed for crossover connections. At the ends, the patch cables are terminated in RJ-45 plugs that comply with the IEC 60603-7 standard and to relieve the mechanical stress of the cable in the plug, they are assembled with a molded boot of the same color as the cable jacket. Patch cables can be used both as patch cords and as work area cords. ConduNet patch cables have the following specifications and features.
Download

RJ45 CATEGORY 6 KEYSTONE TYPE JACK WITH FOLDING DUST COVER

Category 6 jacks are manufactured with a flame-retardant thermoplastic body. Printed circuit boards with a type 110 IDC insulation displacement system are available in white, blue, red, and black, with the following specifications and features:
Download

IDC 110 CATEGORY 6 SYSTEM PATCH PANEL WITH 24 AND 48 PORTS

Category 6 patch panels are manufactured with a black carbon steel faceplate and a flame-retardant PBT (Polybutylene Terephthalate) body. Printed circuit boards with a 110-type IDC insulation displacement system are available in 24 and 48 RJ-45 ports, with a rear bar for cable management, bend radius preservation, and stress relief.
Download

UTP CATEGORY 6 PATCH CABLE

Patch cables are manufactured with 23 AWG stranded wire that allows the flexibility needed for crossover connections. At the ends, the patch cables are terminated in RJ-45 plugs that comply with the IEC 60603-7 standard and to relieve the mechanical stress of the cable in the plug, they are assembled with a molded boot of the same color as the cable jacket. Patch cables can be used both as patch cords and work area cords. ConduNet patch cables have the following characteristics:
Download

Shielded RJ45 Jack Category 6A Keystone Type

Category 6A shielded jacks are manufactured with a die-cast zinc body with nickel plating. Printed circuit board with a 110-type IDC insulation displacement system.
Download

24-PORT MODULAR ANGLED STRAIGHT PATCH PANEL

ConduNet 24-port modular angled straight patch panels are designed for both shielded and unshielded systems.
Download

KEYSTONE TYPE BLINDING MODULE FOR WALL PLATE

(No description)
Download

F/UTP CATEGORY 6A PATCH CABLE

Category 6A F/UTP patch cables are manufactured with 26 AWG stranded wire, providing the flexibility needed for crossover connections. The ends of the patch cables are terminated with RJ-45 plugs that comply with the IEC 60603-7 standard and have anti-tangle protection in the same color as the cable jacket. The patch cables can be used as both patch cords and work area cords.
Download

2 and 4 port wall plate for keystone jacks

ConduNet wall plates are manufactured in 2 and 4 spaces (ports) to insert standard size RJ-45 Keystone type connectors, thus ensuring that any connector that meets the Keystone specification can be inserted into ConduNet wall plates. The wall plates also comply with the following specifications and features:
Download

ST FIBER OPTIC CONNECTOR

ConduNet ST connectors employ a spring-loaded, half-turn bayonet locking system. This mechanism makes them highly resistant to vibration, making them suitable for environments where connection security is critical. The high-quality 2.5 mm diameter zirconia ferrule ensures that the fiber is properly centered within the capillary channel, achieving the best possible coupling. ConduNet ST connectors are periodically subjected to basic optical, mechanical, and environmental testing, performed according to normal in-plant quality control procedures, which allows us to guarantee the highest quality in our ST connectors.
Download

SC FIBER OPTIC CONNECTOR

ConduNet SC connectors are designed to NTT-SC standards, making them fully compatible with SC-type hardware. The high-quality 2.5 mm zirconia ferrule features a 127 µm capillary channel for multimode fibers and a 125.5 µm capillary channel for single-mode fibers.
Download

ZIPCORD OFNR OPTICAL CABLE

ConduNet LC connectors are suitable for high density due to their small size, allowing for a very high integration scale. The anchoring system is similar to that of RJ-1.25 connectors; simply press the top tab to insert or release them. Their high-quality zirconia ferrule has a diameter of XNUMX mm, half the diameter of their predecessor SC and ST connectors. ConduNet LC connectors are periodically subjected to basic optical, mechanical, and environmental testing performed according to normal in-plant quality control procedures, allowing us to guarantee the highest quality in our LC connectors.
Download

CONDUNET OPTICAL DISTRIBUTOR

The ConduNet optical distributor houses optical link splices and terminations in a single rack unit. It facilitates connection to active network equipment. The ConduNet optical distributor features a sliding tray that allows easy access to the splice trays. It is also equipped with two trays to increase splice capacity. Each splice tray can accommodate up to 24 fiber sleeves (with a diameter of 2,3 mm). Each splice tray can be opened and removed from the optical distributor individually. The ConduNet optical distributor features two drum-type organizers that allow storage of spare lengths of fiber optic strands.
Download

COUPLER MODULES AVAILABLE

(NO DESCRIPTION)
Download

FIBER OPTIC CORD

ConduNet offers a complete line of fiber optic patch cords for connecting multimode and singlemode fiber links in LC-LC, SC-SC, and ST-ST combinations (other connector combinations are available from manufacturer). The cords are available in standard lengths of 1, 2, and 3 meters (other manufacturer lengths are also available). All ConduNet fiber optic patch cords feature the highest quality ConduNet connectors and are terminated and tested to meet the most stringent performance specifications.
Download